GREETING CARD FOR A GUY

Send

This postcard is very original and easy to perform. It will be made of paper and fabric, and thanks to its extraordinary performance, it will repeat the image of Superman. In order to create a postcard we need:

thick cardboard for the base (in this case, 30 cm by 20 cm);
thin paper;
loose cardboard for the design of the middle (19 cm by 15 cm);
white cloth;
scissors;
glue;
brushes;
paints;
three buttons;
white threads;
needle.

First, take the cardboard, which will serve as the basis, and bend it in half.

In the center, draw the Superman logo with a pencil.

We put paints on the future card. Don’t worry if the blue color is not quite even, it’s more important for us to draw a clear logo. All other parts will eventually be hidden under the fabric.

We cut out the arcuate strips from the fabric, on which buttons will subsequently be located.

Stitch strips on the sides. The easiest way would be to sew them on a typewriter, but if you don’t have such an opportunity, you can also flash them manually. Stitched pieces of fabric are applied to the logo. We look at what size hole we need to leave so that the letter is visible. Sew together pieces of fabric in places numbered 1 and 2 shown in the photo.

Next, we cut out a piece of fabric, taking into account the back and front side of the postcard. We attach to the cardboard so as not to make a mistake with the size. Sew the edges of the cut-out fabric in the places marked in the photo with black stripes.

In the same way, we sew the second part of the fabric.

Cut triangular pieces of fabric for the collar. We sew them on the sides and sew to the base.

Glue the inside of the postcard. First you need to glue the fabric, then a sheet of paper over the entire area, and already at the end on one and the other side of the blank from a loose cardboard.