Share
Pin
Tweet
Send
Share
Send
Here, there’s even nothing to imagine everything is clear from the figure, oh yes, you need to connect a thermostat to the heater’s power circuit, and before leaving the pair in the pipe with a fan, you can put a sump for accumulating the liquid that has not had time to evaporate, then it is used again. Instead of an electric valve, you can use a mechanical one.
Now we turn to the liquid for smoke generators, today many different variants of this mixture are sold, but it can be made independently, for this you need 85 parts of water, 10 parts of glycerin (sold in a pharmacy) and 5 parts of alcohol. Glycerin itself was the smoke generator, alcohol increased the evaporation temperature, and water-solvent-filler. You can also experiment with flavors. I used perfumes, a positive result, only they need to be added very little.
Well, that's actually all who have questions we ask in the comments ....
Now we turn to the liquid for smoke generators, today many different variants of this mixture are sold, but it can be made independently, for this you need 85 parts of water, 10 parts of glycerin (sold in a pharmacy) and 5 parts of alcohol. Glycerin itself was the smoke generator, alcohol increased the evaporation temperature, and water-solvent-filler. You can also experiment with flavors. I used perfumes, a positive result, only they need to be added very little.
Well, that's actually all who have questions we ask in the comments ....
Share
Pin
Tweet
Send
Share
Send