Share
Pin
Tweet
Send
Share
Send
- - satin ribbon (2.5 cm) green - 5-6 m,
- - silver tape (1 cm) - 1-2 m,
- - rhinestones
- - glue,
- - scissors
- - cardboard
- - a bottle of champagne.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu.jpg)
So, first of all, I make a cardboard base for a festive decor, for this I cut a rectangle from cardboard in size 297x130 mm.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-2.jpg)
I attach the blank to the bottle, glue the edges. I fix the clerical rubber band.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-3.jpg)
I draw the upper part adjacent to the neck on paper, first I draw a 27x13 cm rectangle and divide it in half (other sizes are shown in the photo).
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-4.jpg)
I cut, make cuts so that our workpiece can be bent and glued securely.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-5.jpg)
I also apply the upper part to the neck, glue the edges.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-6.jpg)
Next, I connect both blanks with glue.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-7.jpg)
Then cut the satin ribbon into strips of 10 cm.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-8.jpg)
I bend the segments in half, coat with glue, glue for 1.5-2 cm from the bottom of the bottle. I fix a number of clerical gum.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-9.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-10.jpg)
I form the next 3 rows in a similar way.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-11.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-12.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-13.jpg)
I turn to the design of the neck of the bottle, for this I coat the upper part with glue, apply the tape, cut off the excess.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-14.jpg)
I decorate the upper part of the workpiece to the already made “skirt”.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-15.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-16.jpg)
Here's a removable Christmas tree I got.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-17.jpg)
Of silver ribbon and rhinestone I carry out the decor. You can invent it yourself.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-18.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-19.jpg)
To make a bow, cut off 15-20 cm of a green satin ribbon, press each edge to the center, sew it together.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-20.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-21.jpg)
I sew silver on the top of the green ribbon.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-22.jpg)
Next, from a small segment, I perform a jumper for our bow.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-23.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-24.jpg)
Decorate with a silver ribbon. I repeat, the decor can be any, at your discretion.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-25.jpg)
For tails, measure out about 20-25 cm, I also press the edges of the tape to the center and sew.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-26.jpg)
I bend at an angle and flash it again.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-27.jpg)
Again came the turn of the silver ribbon.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-28.jpg)
So, I sew the bow and ponytails together. Here is a decoration for the Christmas tree I did.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-29.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-30.jpg)
I attach an elegant bow to the junction of the "magnificent skirt" and the upper part.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-31.jpg)
Here is such a New Year’s beauty I got.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-32.jpg)
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-33.jpg)
I remind you that you can use this decor next year.
![](http://img.uaft2404.org/img/sdela-2019/shampanskoe-k-novomu-godu-34.jpg)
Share
Pin
Tweet
Send
Share
Send