Share
Pin
Tweet
Send
Share
Send
Today we will disassemble the modem from webstream
Here is a general view of the modem.
Turn the modem over.
Remove the rubber bands that cover the bolts.
Turn off the bolts.
And remove the cover. Now we have the opportunity to consider the modem stuffing!
Voooooooot she!
Here is the first Realteck processor.
And here is the second, only smaller Realtek processor.
Capacitors, coils, resistors, diodes, etc.
And these are the first 3 green LEDs, and one such white little RGB.
Here is the board itself without a cover.
This is the port for the line.
This is an Ethernet port.
And this is a reset button, a charging slot and a switch.
The board is upside down, there are fewer tracks on it.
And a couple of photos
All! :-)
Share
Pin
Tweet
Send
Share
Send
