HOW TO GET RID OF STUBBORN TRACES OF FAT ON A COOKER HOOD IN 5 MINUTES

Send

One of the problems when cleaning the kitchen is traces of oil. Some surfaces are covered with a dense layer of fat. And with water, such dirt cannot be cleaned. But there is a way, how to wash the stove, hood or table from traces of oil without any special effort in just a couple of minutes.

What do you need?

Below will be presented the most budgetary way to get rid of traces of fat. Therefore, you do not need to buy expensive cleaning products. Would need:

Hot water. You can use hot tap water, but it’s best to boil some water on purpose.
Caustic soda. It is also called caustic soda or sodium hydroxide. It is a powder with large granules or flakes. It is sold in hardware stores by kilograms. And it is very cheap.
Sprinkler. The spray nozzle will help to evenly distribute the substance on the surface.
The abrasive side of the sponge. Conventional dishwashing sponges have soft and hard sides. To deal with traces of fat, you need a tough side. You can immediately buy a full abrasive sponge.

Gloves. Since you have to work with caustic soda, it is better to protect yourself with rubber gloves.
All of these funds can be bought at a hardware store.

Cleaning instructions

The entire cleaning process will take only a few minutes. First you need to prepare. To do this, make a cleaning mixture. Caustic soda is mixed with hot water.

You need to do this right in the bottle.

First, you should throw 80-100 grams of powder there, and then pour 0.5 liters of hot water and stir.
The finished mixture must be distributed over the contaminated surface.

The spray is perfect in this situation. It will help to quickly and evenly fill everything with a cleaning agent.

It is necessary to douse not only horizontal surfaces, but also all areas where there are traces of fat. Particular attention should be paid to dashboards with buttons or turn signals.

Even before the product is distributed over the entire area of the plate, it will be possible to notice how the fat begins to “float”. But you need to leave the liquid for 2-5 minutes for a greater effect.
Residues of grease and cleaning agent are easily cleaned with a sponge.

Then rinse the already clean surface with plain water and wipe dry.

This method is suitable for any surface (glass, metal, wood). The cleaning agent is suitable even for utensils, except for aluminum and Teflon-coated. The method of removing traces of fat is very cheap and, despite the use of caustic soda, quite safe. It can be used in homes with young children and animals. The main thing is to observe the storage rules of caustic soda.