When transporting a spare battery for a vehicle, it is imperative to be careful that it does not roll over.
In this review, the author shows how to make a very simple homemade device for the safe transportation of the battery. Please note that in this case, the battery is not transported in the trunk of a car, but in a trailer.
The first step is to cut off the size of the four pieces of the building corner. And then you need to weld all four pieces together. Naturally, the base is made according to the size of the battery itself.
The main stages of work
Next, cut small pieces from the metal strip, drill holes in them, and then weld on the sides of the resulting frame.
At the next stage, it remains only to make the last structural element, which, in fact, will fix the battery. This will require several steel plates and a loop.
And in the end, it will be necessary to weld two eyelets for the padlock (you can make them from the usual building corner).
The final touch is grinding and painting the metal. A more detailed process of manufacturing a homemade device for transporting a battery (battery) of a car is recommended to watch in this video.
