To quickly sharpen blunt drills for metal, you can make a simple nozzle for a dremel. To do this, you need an ordinary hexagonal nut and a piece of profile pipe 10 * 10 millimeters.
First you need to cut off a piece of the L-shaped form from the profile pipe to get a "boat". A drill will lie in it in the process of sharpening its cutting edge.
The main stages of work
After that, it is necessary to weld a piece of profile to the nut at a right angle. Then, a cut is made in the middle of the profile pipe so that it can be bent. The resulting "gaps" will need to be brewed.
At the next stage, the resulting part must be sanded to remove burrs and irregularities. And after that, the finished nozzle on the dremel can be painted with spray paint.
Next, a homemade nozzle is screwed onto a dremel, and you can proceed to sharpen the drill for metal. Here is a useful and simple device in the end it turned out. At the same time, the materials are from those that were at hand.
In detail about how to make a homemade nozzle on a dremel with your own hands for quick sharpening of metal drills, you can see in the video on our website. And write in the comments, did you like this homemade product?
