Cooking food quickly on the go is not an easy test. Especially for those who rarely choose nature. In order to simplify the cooking process as much as possible, you can take a universal stand for a camping pot with you when you go camping, hunting, fishing or another outdoor event.
The store sells all sorts of different tripods and campfire stands for camping bowlers. That's just the price very often "bites", and the quality leaves much to be desired. Therefore, a home-made design is a better option.
In this review, the master suggests making a simple universal stand for a camping pot with your own hands, using old parts from the car. Well, why not give it a try? As the main materials will be required: four extensions of the suspension arm from the VAZ 2109 and a camshaft pulley.
The main stages of work
First of all, on one side of the suspension arm extension, it is necessary to cut the thread along the entire length, cut the thread with a die (handle). Then we wind the nut and cut off the excess.
However, in this case, the master does a double job. It is much easier to first cut the stud to the desired length, and then cut the thread and tighten the nut. What do you think? Write about it in the comments below the video.
At the next stage of work, an open-end wrench will be required (you can even use some old one, which you will not mind). We cut off one edge of the grinder, after which we drill a hole with a diameter of 10 mm.
In this case, the wrench performs two functions: it is used to tighten the nuts, and also as a suspension for the cauldron. Then you can begin to assemble the structure. In principle, a completely normal homemade work turned out.
If you decide to also make a universal stand for a camping pot from auto parts, we recommend watching the video on our website.
