If you are arranging the territory of a summer cottage or garden, then this idea for homemade products will definitely come in handy. In this article, we will tell you how to make a convenient bench out of a bent shaped pipe with your own hands, which remained after the construction of the gazebo. From the main tool for work, you need a grinder. Well, let's get started?
Step-by-step process for making a garden bench
First of all, we make the marking and cut off two pieces of the profile pipe 100 cm long, and then four more pieces - 40 cm each.Also, two more blanks from the profile 46 cm long will be required.Then we try on the parts, fit them in place and weld together. You should get two halves of the bench.
After welding, for greater aesthetics, we clean all seams. We use for this angle grinder with a cleaning disk. Then, from a rectangular profile of 40x20 mm, two pieces 1.55 meters long must be cut, which are welded to the halves of the bench. Thus, the design itself will be more durable and stiff.
Then it is necessary to weld two braces from the profile pipe 20x20 mm. As "heels" for the legs of the bench, old brake pads are ideal. At the last stage of work, we drill holes in the profile and fasten wooden boards with rounded ends 95 mm wide on screws. The result is a simple but comfortable garden bench for relaxation.
